Tidioute Cutlery #53308 Cuban Cigar Stockman by Great Eastern Cutlery.The main blade is a Clip point,the Secondary is a Sheepsfoot,and the third blade is a Spey Blade.The overall length is 4 1/8 inches in the closed position. The handle material is Acrylic in the "Water Snakes" coloring.The knife features Nickel Silver Bolsters and Pins with Brass Liners. 100% American Made.

Price $92.99

 

This is the Great Eastern Cutlery #253110EOJ "EasyOpener" Jack Knife. It has a single 440C Stainless Steel Sheepsfoot blade. The blade features the Great Eastern blade etch. Handles are Grap Jigged Bone and it has the "Acorn" inlay shield of Nickel Silver. The knife has Nickel Silver bolsters and Brass pins and liners. It is 3" long overall in the closed position.

Price $71.00

 

 

The Northfield UN-X-LD #892309 "Executive Whittler" by Great Eastern Cutlery. The Blades are 1095 Carbon Steel. The Main Blade is a Wharncliffe Blade and the Secondaries are a Sheepsfoot and a Pen Blade. The handles are Turquoise Jigged Bone and the knife is 4" in overall length when closed.

Price $94.72

 

This is the Tango #538210 Furtaker Trapper from Great Eastern Cutlery.It features a Clip main blade with the "Furtaker Trapper" blade etch. The Secondary Blade is a Wharncliffe blade with the "Tango" blade etch. Handle material is "Eggs and Hot Sauce" Acrylic. It has a Nickel Silver Guitar inlay sheild and Nickel Silver Bolsters. The overall length is 4" closed.

Price:$81.97

 

The Great Eastern Cutlery #252110EO.This knife has a single Spear blade made from 440C Stainless Steel.The handle material is Desert Sand Jigged Bone.The knife has the Great Eastern inlay shield,used exclusively on their Stainless Steel knives. The knife also has Nickel Silver bolsters and Brass pins and liners. This knife is the "Easy Opener" pattern Sleeveboard.

Price $71.00

 

This is the Great Eastern Cutlery #252110EOJ "Easy Opener" Jacknife. This knife has a single Spear Blade of 440C Stainless Steel.The blade features the Great Eastern blade etch. The Handle material is Grape Jigged Bone and has the Nickel Silver "Acorn" inlay shield. The bolsters are Nickel Silver and the knife has Brass Pins and Liners. The overall length is 3" closed.

Price:$71.00

 

The Great Eastern Cutlery #253110EOJ "Easy Opener" Jack Knife. This model has a single 440C Stainless Steel Sheepsfoot Blade. The blade also features the Great Eastern blade etch. Handle Material is Desert Sand Jigged Bone with a Nickel Silver "Acorn" inlay shield. The knife has Brass Pins and Liners and Nickel Silver bolsters. The overall length is 3" closed.

Price:$71.00

 

Tidioute Cutlery 2 Blade Scout Trapper. This is the Tidioute #735210 Scout Trapper from Great Eastern Cutlery. The Main Blade is a Drop Point/Skinner Blade,and features the "Tidioute" blade etch. The Secondary Blade is a Spey blade. Both blades are made of 1095 Carbon Steel. The handle material on this knife is Frontier Smooth Bone.The "Tidioute" inlay shield is Nickel Silver,and the Bolsters are also Nickel Silver. The pins and liners are Brass. The overall length is 3 3/4 inches closed. This is another example of Old-Fashioned American Craftsmanship from the Cutlers at Great Eastern. The knife has a Lifetime Warranty,your Satisfaction is Guaranteed.

Price $80.82

 

The Tidioute Cutlery Scout Trapper #735210 by Great Eastern Cutlery. This two blade Scout Trapper features a Drop Point/Skinner Main Blade and a Spey Blade for the secondary blade. The Main Blade has the typical Tidioute Cutlery blade etch. The handle material on this knife is Green Abalone "Looking Glass" also known as LVS Abalone. It is a laminate consisting of a layer of Green Acrylic,a layer of Natural Abalone Shell,and a layer of Clear Acrylic on top.This allows the knife to priced lower than if one solid piece of Abalone were used,also the Clear Acrylic layer on protects the Abalone from damage when carried or used. The Beauty of the Natural Abalone easily shines through the Clear Acrylic. The Bar inlay shield and bolsters are made of Nickel Silver. The pins and liners are Brass. The overall length of the knife is 3 3/4 inches when closed. This is another Innovative knife design from the Master Cutlers at Great Eastern Cutlery. 100% American Made and Warranted for Life. Your Satisfaction is Guaranteed!

Price:$81.00

 

Northfield UN-X-LD #235110ECL Pioneer Trapper Linerlock with Burnt Goldenrod Jigged Bone Handles by Great Eastern Cutlery. This knife has a Single Drop Point/Skinner Blade. The blade features the Northfield UN-X-LD blade etch. The blade is made from 1095 Carbon Steel. The handle material is Burnt Goldenrod Jigged Bone. The UN-X-LD inlay shield,bolsters and end caps,and linerlock are made from Nickel Silver. The pins and liners are Brass. The overall length is 4 1/2 inches closed. This big guy is a handful of knife! This knife is made to last a lifetime of hard work.It is a Big,Solid,knife meant to get the job done. It would also be a great edition to the collection. These are already sold out at the factory! 100% American Made. Lifetime Warranty! Satisfaction Guaranteed!

Price $89.87

 

Tidioute #735210 Beaver Tail Trapper from Great Eastern Cutlery.This two blade Trapper has a Drop Point/Skinner Main Blade and a Spey Blade as the Secondary blade. The Main blade is etched with a Beaver picture and "Beaver Tail" lettering. The blades are 1095 Carbon Steel. The handle material is Jigged Exotic Bubinga Wood.In keeping with the Beaver Tail series,this knife has a Nickel Silver "Beaver" inlay shield. The bolsters are also Nickel Silver,the pins and liners Brass. This is the latest addition in the GEC Beaver Tail series of knives. 100% American Made with a Lifetime Warranty. Your Satisfaction is Guaranteed!

Price:$72.31

 

Northfield UN-X-LD 2 Blade Congress-Green Banana Bone From Great Eastern Cutlery this is the Northfield UN-X-LD 2 Blade Congress. This knife has Green Banana Smooth Bone Handles.
The blades are made from 1095 Carbon Steel. The Main Blade is a Sheepsfoot Blade,and has the "UN-X-LD" blade etch. The Secondary Blade is a Pen Blade.The knife features Ringed Bolsters made of Nickel Silver and a Fancy Inlay Shield,also of Nickel Silver.The pins and liners are Brass.
Overall length is 3 5/8 inches when closed. Great Eastern Cutlery made 25 of these knives without a serial number. This knife is 100% American Made,and we offer Free Shipping in the USA.

Price $78.04

 

Tidioute Riverboat Gambler-Red Looking Glass Abalone
From Great Eastern Cutlery this is the Tidioute #892210 Riverboat Gambler. The main Blade is a Spear Blade and the Secondary Blade is a Pen Blade. Both of the blades are 1095 Carbon Steel.
The Handle material is Red Looking Glass Abalone. This is a laminate of Red Abalone with a layer of Clear Acrylic on top. The Acrylic gives the Abalone protection and durability.
The Pinched and Dimpled Bolsters are Nickel Silver. The Bar Inlay Shield is also Nickel Silver. The pins and liners are Brass.Overall length on the knife is 4" closed.

Price $82.85

 

Northfield UN-X-LD Riverboat Gambler-Snakewood From Great Eastern Cutlery this is the Northfield UN-X-LD #892210 Riverboat Gambler.The Main Blade is a Spear Blade and features the UN-X-LD blade etch. The Secondary Blade is a Pen Blade. Both blades are 1095 Carbon Steel.
The handle material is Snakewood,an Exotic Hardwood from Africa.The Ringed and Dimpled Bolsters are made of Nickel Silver as is the Fancy Inlay Shield. Pins and liners are Brass. The Overall Length of the knife is 4" closed

Price $83.44

 

From Great Eastern Cutlery we have the Northfield UN-X-LD #892210 Riverboat Gambler.The Main Blade is a Long Spear Blade and has the "Northfield UN-X-LD" Blade Etch. The secondary Blade is a Pen Blade. The blades are 1095 Carbon Steel and also feature a Long Pull and Back Swedge.The UN-X-LD Inlay Shield and Bolsters are Nickel Silver.The Pins and Liners are Brass. The handles are Burnt Stag.The overall length of this knife is 4" closed.This is another unique pattern from Great Eastern Cutlery.American Made in Titusville,PA and Warranted for Life.

Price:$100.00

 

 

 

This is the Tidioute #668210M Mink Skinner from Great Eastern Cutlery.Both blades are a Long Clip type blade made from 1095 Carbon Steel. The Main Blade features the "Tidioute Cutlery" Blade Etch.The Secondary Blade has the "PPP" etch,meaning this knife is from the "Premier Pattern Production" first run of this pattern.This knife has the Bar Inlay Shield and Bolsters made of Nickel Silver.Pins and Liners are Brass. The Handle material is Red Abalone Looking Glass. A Laminate of Abalone and Clear Acrylic.This handle material is exclusive to Great Eastern Cutlery. Overall Length of the knife is 3 1/2" when closed. The knife is 100% American Made and we offer Free Shipping in the USA. Your Satisfaction is Guaranteed.

Price:$83.00

 

Great Eastern Furtaker Muskrat-Elk-Serialized This is the Great Eastern #538210M.From Great Eastern Cutlery this beautiful knife has a Clip Main Blade and a Wharncliffe Secondary Blade.As with all the Great Eastern branded knives the blades are 440C Stainless Steel.The Main Blade is etched "Furtaker Muskrat" and the Secondary is etched "1 of 25".The Acorn Inlay Shield is Nickel Silver,as are the Bolsters. The pins and Liners are Brass.The handle material is American Elk which GEC uses exclusivley on the Stainless Steel knives.This is a serial numbered knife,with this particular knife having the number 12 etched on the bolster. A Certificate of Authenticity is also included.This knife is a true collectible,as only 25 were ever produced.Great Eastern Cutlery doesn't even show it on their website.Your Satisfaction is Guaranteed. Free Shipping in the USA.

Price:$137.20

 

 

Great Eastern Furtaker Muskrat-Antique Amber-Serialized This is the Great Eastern #538210M from Great Eastern Cutlery.The Main Blade is a Clip Blade and is etched with"Furtaker Muskrat". The Secondary Blade is a Wharncliffe Blade and is etched "1 of 25". Both of the blades are 440C Stainless Steel.The Acorn Inlay Shield,and the Bolsters are made from Nickel Silver. The Pins and Liners are Brass. The handles of this knife are Antique Amber Jigged Bone. The overall length is 4".
This is a serialized knife,with this particular knife haveing the number "15" etched on the Bolster. A Certificate of Authenticity is included.Only 25 of these knives were produced,making them quite collectable. Free Shipping in the USA.

Price:$104.76

 

Great Eastern Furtaker Trapper-Elk-Serialized This is the #538210 Furtaker Trapper from Great Eastern Cutlery. The Main Blade is a Clip Blade and is etched"Furtaker Trapper". The Secondary Blade is a Wharncliffe Blade and is etched"1 of 25". Both Blades are 440C Stainless Steel. The Acorn Inlay Shield and the Bolsters are Nickel Silver. The Pins and Liners are Brass.The handle material is American Elk, only used on the Great Eastern Stainless Steel bladed knives.Overall length is 4". This is a Serialized knife,this particular knife being #5 of 25. The number "5" is etched on the bolster.Another Beautiful,Collectable Pocketknife from the folks at Great Eastern Cutlery.

Price:$137.20

 

 

This is the Tidioute #488110 Single Blade Trapper from Great Eastern Cutlery. The Single Blade is a Long Clip Blade. It has the "Tidioute Cutlery" Blade Etch. The blade is 1095 Carbon Steel.The Tidioute Inlay Shield,and the Bolsters are Nickel Silver.The Pins and Liners are Brass.The handles on this knife are Tractor Red Jigged Bone.The overall length is 3 7/8" closed.
This is a lightwieght,classic pattern for an EDC knife.Satisfaction Guaranteed. Free Shipping to the USA and APO addresses.

Price:$64.46

 

From Great Eastern Cutlery we have the Tidioute #531310 Cattle Rancher.The Main Blade is a Short Clip Blade,the Secondary Blade is a Spey Blade,and the Third Blade is a Sheepsfoot Blade.The Main Blade has the "Tidiout Cutlery" Blade Etch. All the blades are 1095 Carbon Steel. The Tidioute Inlay Shield and the Bolsters are Nickel Silver. The Pins and Liners are Brass. The Handles of this knife are Goldenrod Wave Jigged Bone.The knife is 4 1/8" long when closed. These knives were made 25 with serial numbers and 25 without numbers. This is one of the un-numbered knives.This Large Stockman is American Made in Titusville,PA.

Price:$100.41